User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            HP 8112A:Pulse Generator
DATE:                  13-Apr-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       1
NUMBER OF LINES:       26
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
# This procedure covers the same tests the Hewlett Packard Service Center
# performs. Hewlett-Packard program rev A.01.01 as of Jan 1992.
  1.001  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.002  DISP         During the performance test, all shields and connecting
  1.002  DISP         hardware must be in place. All tests are designed to
  1.002  DISP         verify the published 8112A specifications.
  1.003  DISP         Note that the instrument should be given a 15 minute
  1.003  DISP         warm-up period before the commencement of the test.
  1.004  DISP         Connect the System port 1 to the UUT IEEE connector.
  1.005  CALL         HP 8112A Sub1
  1.006  CALL         HP 8112A Sub2
  1.007  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.007  DISP         {º This Completes the Verification º}
  1.007  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.008  END